Accidental domestic fires can be caused by a variety of factors. The most likely culprit accounting for just under 50% of accidental dwelling fires in 2016/17 were cooking
Fire Pipe Collars are designed to help reinstate the fire resistance of a wall or floor, which has been penetrated to allow services such as gas, water, plastic flammable pipes and flammable gases. Our Pyroplex fire pipe collars can be fitted to or set-in to a wall or ceiling construction. They are also suitable for use on concrete, masonry and plasterboard partitions.
Our fire pipe collars are available in a number of fire ratings including 2 and 4 hour ratings. This means that they should resist fire up to 2 or 4 hours depending on the chosen collar, this can make the difference of a contained fire and an un-contained fire. Pyroplex fire pipe collars are extremely easy to fit in to place using only a few screws and features a tab closing device ensuring a quick and easy fix. The pipe collars will seal pipes of sizes between 55mm-160mm ideal for most requirements.
Fire Wraps are also extremely important whilst protecting a building from fire. They have been specifically designed to reinstate fire protection of walls and floors that may have been penetrated by services such as plastic flammable pipes or drainage services. They are available in 2 and 4 hour fire ratings which means that the fire wraps they should withstand fire for up to 2 and 4 hours.
Installation of fire wraps is very easy, to install the wraps you simply need to wrap it around the pipe using an adhesive tab and slide along the pipe into the wall or floor cavity. If you require more information about any of our pipe collars, downlighter covers and fire wraps please do not hesitate to contact our technical team on 0113 2713266 or alternatively feel free to email us.